There are quite a few reasons why the computer does not see the smartphone. Most often this occurs due to the activation of any other connection mode other than a USB drive. Either this happens due to missing or conflicting drivers. Less commonly, the cause may be various malfunctions in the equipment.

This material presents solutions to the most common problems that arise when connecting a mobile device to a PC via USB. For convenience, all tips are divided by importance.

The smartphone is not detected as an external drive

Note:The smartphone must be turned on; if it is locked with a pattern, you need to unlock it!

The very first and obvious action is to let the computer understand in what mode the device is connected. If the smartphone simply charges when the cable is connected, it may be connected in charging mode, or as a media player. If you are using an Android device, you must activate developer mode and then enable USB debugging.

For instructions on how to activate developer mode and USB debugging, see this video.

When everything is done, the next time you reconnect, pay attention to the display and notification shade on your smartphone. A notification should appear asking you to select “Enable USB storage.”

If you are using a smartphone with a different OS, everything is the same. In most cases, in order for the device to be recognized as an external drive, you must select the correct connection type.

One more thing: check if the modem mode is activated on your mobile device. We go to the network settings settings, and if the modem is activated, turn it off.

The computer doesn't respond at all

It is advisable to check the serviceability of components as early as possible to save your own time. If you don’t hear a characteristic signal when connecting, the charge indicator on your smartphone doesn’t blink, the backlight doesn’t activate, or pop-up notifications don’t appear, we try to temporarily change the equipment.

Steps to be taken:

Check the USB cable for serviceability. We just use a different working cable and that's it.
We connect to other connectors. Inoperative USB ports can only be referred to if no “USB” peripherals connect to them at all: mice, keyboards, flash drives, etc.
We are trying to connect the smartphone via USB to another system unit or laptop. If it works, look for problems with the drivers and operating system on your PC.

Software problems

Let's say the computer responds to the device, but a notification appears on the taskbar that the driver installation failed. This indicates the need to install the “correct” USB drivers on the PC.

Often, universal drivers can be downloaded from the manufacturer's website. For example, on the official websites of Samsung and LG there are special sections where you can download a driver that will fit all Samsung and LG models, respectively.

If you have connected many devices from different manufacturers, their drivers may conflict. Try to remove unnecessary ones and install the necessary ones again. Don't forget to restart your PC (you can do your phone at the same time).

If nothing helps at all

In the event that after executionabsolutely everyone recommendations the computer does not see the smartphone, we cannot exclude the fact that the USB connector on the smartphone is faulty. Without special skills and certain equipment, this problem cannot be solved on our own. It is necessary to take the mobile device to a service center or to a workshop where the USB will be resoldered.

You will also like:

How to determine the LTE channel number by frequency
Grandmotherphones 2016: review of current models

Hi all! In this article we will talk about how to connect Android as a modem to a computer. The need for such a scheme arose for the author of the blog, again at work. Remember migrating a small local network?

So it is with her that the intense struggle continues. Today I received a call from an accountant asking me to set up the Internet, since deadlines for submitting various tax returns are running out. Of course, an interesting task, given the fact that there is not yet a working telephone line in the room.

But none of the computers, unfortunately, is equipped with a wireless network card, so the tried-and-true organization scheme disappears immediately. But there is still a solution and it is quite simple.

So, friends, to connect an Android smartphone to your computer as a modem, we will need drivers for the mobile device you are using and a standard USB charging cable from the kit. In general, let's connect:

In this example, we use Huawei P7 based on the operating system Android version 4.4.2. Immediately after pairing the devices, the computer will begin to detect the phone and ask you to install drivers. We must agree with this.

It is known for certain that many users have difficulties at this step, since the disk out of the box is not always at hand, and not everyone succeeds in finding the appropriate version of drivers on the Internet the first time.

Therefore, the advice here will be this. Immediately download the proprietary program to synchronize your gadget with your computer. It will already contain all the files and components necessary for installation. For example, for Huawei it is called HiSuite.

After this, the first thing you should do is go to the “Settings” menu:

Then in the wireless networks section, select "More":

In the next step we find the option “Modem mode”:

And, in fact, check the box next to the “USB modem” function:

Now all that remains is to return to the very beginning and activate data transfer:

It is clear that for this you need to have a 3G mobile Internet service configured on your phone, which is provided by the cellular operator as part of the tariff plan you are using.

And now, in principle, our Android smartphone should already work as a modem for a computer via a USB cable. If pages do not open in the browser, you need to check whether the recently appeared telephone connection is active on your PC:

Also in such cases it would be useful to use PING. And with this, our story about how to connect Android as a modem to a computer via USB has come to its logical conclusion.

If you still have any questions, ask them in the comments to the article. Let's think about their solution together. And in conclusion, you can watch another interesting video.

Why can’t a laptop or computer running XP, windows 7, windows 8, windows 10 see a xiaomi redmi, samsung galaxy, lg, htc, huawei, lenovo, meizu, sony xperia, asus, nokia, bq, fly, honor phone via USB? alcatel one touch, mtp, dexp or mts with android 7.0, android 6.0, android 5.0, android 4.4 2 and so on.

In fact, there are various ways to connect a mobile device to a computer in order to exchange files remotely, for example, through the cloud, we can also connect via Wi-Fi, Bluetooth, an appropriate application, or do it the classic way using a USB cable.

But despite its simplicity, the last method (via USB) is sometimes the most problematic. When connecting to a computer or laptop, or rather a Windows system, you need to find the appropriate drivers.

If they are not found, then the connected Android phone via USB will not be visible to them, but this is not the only reason. There may also be another error that is preventing the connection. Let's look at the main reasons why this happens.

NOTE: the pictures were taken on a Samsung Galaxy A3 with Android 7.0, but on others such as a5, s3, a3, s4, j1, s5, xiaomi redmi 4x, 3, mi5, 4a, and all the others, the differences are not big.

If your computer does not see photos, files, folders, music after flashing the firmware, the microsd flash drive is not visible or does not recognize it as a device, as a drive, as a modem, then the matter may be due to unsuccessful firmware, but most likely you did not enable the required protocol (how to enable more about it below).

The main reasons why a computer or laptop does not see an Android phone connected via USB and what to do

The phone Samsung Galaxy, Lenovo, Nokia Lumia, Asus Zenfon, Meizu, Sony, Xiaomi, Huawei, Alcatel, Xiomi, Fly, Honor, Micromax, Sony Xperia, Philips, Prestige, like any other equipped with a USB port, may not be recognized if device has been exposed to water, make sure the USB port is completely dry before connecting the USB cable.

For a smartphone or tablet to be visible to a computer or laptop, the device's screen must be unlocked and the USB connection must be enabled for file transfer. The connection mode is always set to charging only by default.

To help your computer detect your cell phone, select the file transfer connection mode each time you connect the device to your PC.

Also, be sure to ensure that you are using the original USB cable specifically designed for this device and that it is properly connected to your computer.

If Windows still does not see the phone, try using another USB port on your computer, just do not use a hub or USB extension cable. Try using a different cable to make sure the one you are using is not damaged.

If your phone has a micro SD card, turn it off, remove the flash drive, and reinsert it. Restart your computer. Turn on your smartphone or tablet and connect it to your computer using a USB cable.

Problem still exists? Try using a different computer or look for a USB driver for the device you are using and look in Device Manager to see if there is a yellow sign.

If you are using Windows N or KN, download the Media Feature update package to enable file transfer. These versions of Windows do not support file transfer using MTP. For XP you need to install the MTP (Media Transfer Protocol) protocol from the Microsoft website.

Five brief reasons why a computer / laptop does not see a smartphone / tablet when connected via a USB cable

Water got in.
The phone is locked.
The correct file transfer protocol is not enabled.
The USB cable you are using is not the original one.
Your computer or laptop does not support this protocol.

What to do to properly connect your smartphone via USB so that it is visible to your computer or laptop

Photos, videos, installing multiple applications or downloading music from the Internet - all these activities effectively exhaust the memory of your mobile phone.

In order to maximize the capabilities of your smartphone, you should periodically transfer the most important data to your computer's hard drive.

Archiving files helps to increase the security of files (as a backup) and allows you to practically not limit the memory of your smartphone.

Below you will find three simple steps on how to connect your phone to a personal computer.

Step 1 what to do – connect your smartphone or tablet

When you connect your smartphone or tablet to your computer with a USB cable, Windows will automatically detect new hardware and install the most necessary drivers.

Only older versions of Microsoft software, such as Windows XP, may cause problems. You will need to update Windows to the latest version or download the MTP protocol.

Step 2 what to do - setting up your phone

When connecting, you need to select the correct communication protocol - this is key to accessing different types of files and programs. Below I will explain two options:

Media Device (MTP) allows you to access all media files such as photos, videos or music. MTP allows you to download and delete all the contents of your mobile phone.

Camera (PTP) - this option recognizes the phone as a camera and allows you to directly overwrite files in specialized programs that process graphics in RAW form. If you connect correctly, the phone will require permission - allow it.

NOTE: DO NOT delete important Android system files located in folders labeled "Android".

Step 3 what to do - transfer files from phone to computer

To view your device, launch My Computer. You should see your phone among the drives, and transferring files is very easy - you can just drag and drop files or copy and paste.

Usually the computer asks what you want to do. You can choose one of the options, but it is not required.

NOTE: in older versions of Android, there are more USB connection modes - optimal for using USB Mass Storage. You can switch to it by clicking on the connection message in the notification area.

Why doesn't my phone connect via USB to my computer - it only charges?

The first thing you need to do is set the settings correctly in “Developer Options”. How to get there - .

If the phone is just charging, try connecting to another USB port. If you have 3.0 and 2.0, then try 2.0 first.

If you find other similar USB cables in the house from other devices in the house, try connecting with them.

Connect to another computer. If they also don't see the phone, then the problem is with the phone or the cable. If it does, there is a problem on your computer. Open Device Manager and disable Power Saver for Generic USB Hub.

IMPORTANT: new versions of Android are configured by default so that when connected via USB to a computer, the phone will only charge. You need to change the USB mode from USB charging to another.

In conclusion, I will repeat. If it is very important for you to transfer files to your computer, but it does not see your phone via USB, then you can use other methods: synchronization via Google Drive, OneDrive, Dropbox, Yandex Disk, AirDroid application, and also transfer them via wifi or bluetooth.

I'll wrap it up here, but remember - I'm always happy to quickly answer your questions in the comments below. Good luck.

How to connect an Honor 4C smartphone to a computer, access files on the phone, copy music and movies, as well as problems and solutions.

Connecting Honor 4C to a computer

Connecting Honor 4C to a computer allows access to files, photos and videos stored in the phone's memory or on a MicroSD card through a standard computer explorer.

Huawei HiSuite is not required for this connection! Huawei HiSuite will be useful for additional features such as backing up settings and files.

To connect, you will need a standard USB/MicroUSB cable included with your phone.

There are three possible options for using this connection:

Charge only (default mode)
Files – access to all files
Photos – access to photos

The information in this article applies to software version CHM-U01C10B540, also known as Android 6.0 with EMUI 4.0. Connection examples are shown for a computer with Windows 8 and Windows 10.

Connecting your phone to your computer

This is done with a standard USB/MicroUSB cable (included with the phone), when you connect for the first time, the computer installs drivers for the phone. It is not advisable to interrupt

installing drivers or disconnecting the phone before it is completed. After installing the drivers, the “charge only” mode is used. To change the mode, you need to open notifications (lower curtain) and in the “USB connection established” notification, press the button Files or button Photo to enable the corresponding mode.

What's happened curtain– this is a pull-down panel with bookmarks Notifications And Badges. To open the curtain, you need to pull down the top edge of the screen. The curtain will look something like this:

In all modes, the phone is charged from the computer's USB port. Most computer USB ports are capable of delivering a current of up to 0.5 A, which is half that of a standard adapter (1A), so charging from a computer usually takes longer. Even on USB 3.0, the charging current is up to 0.9 A.

Therefore, to speed up charging It's better to use a network adapter than a computer's USB port.

Charge only mode

In this mode, there is no data exchange between the computer and the phone. However, the phone is still visible on the computer:

Files mode

Files, while the phone works as an external drive, making the phone's memory and MicroSD card available.

HOW TO CONNECT HUAWEI TO A LAPTOP OR COMPUTER

How connect Huawei to laptop via USB cable.

Why doesn't the computer see the phone via USB? 100% will work.

Photo mode

This mode is activated in notifications by pressing the button Photo, while the phone works as a camera (or as a scanner), making it possible to work with images and photographs.

Displaying Honor 4C in Windows 8 Explorer in photo mode

The example shows that in photo mode only the SD card is available, since saving photos to the SD card is selected in the settings.

When opening the SD card, only folders with images are visible – DCIM And Pictures.

A command to import images and videos appears in the phone’s context menu (icons CHM-U01), just like for cameras or scanners.

Disconnecting your phone from your computer

Everything is simple here - I disconnect the USB, and it turns off. In this case, the phone remembers which mode was selected at the time of disconnection, and the next time the USB is connected, it immediately switches to the same mode. This is convenient because you don’t have to lower the curtain and select a mode. But it may turn out that I need to charge the phone from someone else's computer, in which case it will make available all the phone folders on this computer, which is not very good. Therefore, I usually switch to “charge only” mode before disconnecting the USB cable.

Possible connection problems and their solutions

Most often, problems are caused by a failure to install drivers. As a result, when you connect your phone, messages may appear stating that the USB device is not recognized. In this case, you can try reinstalling the drivers.

For example, disconnect the phone, restart the computer and connect the phone again. Another option is to delete the unidentified USB device in the task manager, which will cause the drivers to be reinstalled.

You can also try connecting to another computer.

Less commonly, the cause of the problem is a bad (damaged) cable. To check this, you need to try the connection with a different cable.

Using the connection

The configured connection is used, as on other devices, to copy materials such as photos, music, movies, e-books, audiobooks. You can also use the phone as a flash drive to transfer files, but you must take into account the limitations of the MicroSD card. For example, Honor 4C works with memory cards up to 32 GB, and the file size is up to 4 GB, so you cannot write a movie or archive of, say, 5 GB on it.

Smartphones and tablets running the Android operating system have become an integral mobile device for most people on our planet. It happens that people store a lot of necessary information on their phones, which they naturally don’t want to lose. Fortunately, there are now many ways to save valuable data: photos, music, videos, contacts, and so on. You can resort to creating backup copies or simply transfer the files to your computer, but in the second case, copying contact information and SMS may be a problem for their further recovery.

Another option is to synchronize your smartphone with your PC. And today we will look at exactly this solution option for owners of gadgets from a Chinese manufacturer, and all you need is just download HiSuite for Huawei. It is worth noting that this utility can also help owners of devices from another manufacturer, and also does not have a barrier for Russian-speaking users.

Using HiSuite, you can synchronize contacts and calendar and then edit them, send and receive messages, install and uninstall applications, take screenshots of the smartphone and tablet screen, and manage audio, video and photos. All this is possible under the control of personal computers running the Windows operating system versions XP, Vista and 7, both 32 (86) and 64-bit. The utility will take up about 500 MB of total hard disk space, and for normal operation you need 1 GB of installed RAM and a screen with a resolution of 1024 x 768 pixels.

Let's start installing HiSuite. Your actions:

You need to download the archive with the program and install it on your computer, preferably running the installer as an administrator. To do this, unpack the archive and right-click on the file named HiSuiteSetup.exe, and then select “Run as administrator.” You can download the utility by going to the official website using the link.
We pick up a smartphone or tablet and turn on debugging mode in the settings. To do this, go to Menu – Settings – Applications – USB Debugging mode
Launch HiSuite on your computer and connect your smartphone to it via a USB cable. Once connected, the HiSuite Daemon application should be automatically installed on your phone or tablet. If this operation does not occur or the mobile device does not synchronize, then look below at possible solutions to the problems.

Solving problems synchronizing Huawei smartphones and tablets with a PC:

Make sure USB debugging mode is enabled in your mobile device settings.
Manually install HiSuite Daemon by first downloading the application from the manufacturer's official website.
On your computer, go to Device Manager and remove all unknown devices that are indicated by a yellow exclamation mark. Without leaving the manager, reconnect the mobile gadget to the computer and click “Driver Update” on the newly discovered device, then select installation from the specified location or search for drivers on this computer. The path to the driver file is located in the phone’s memory, which appears on the computer as a removable disk, and inside it there will be a drivers folder.

How to connect the Internet via Wi-Fi on Huawei P10 and similar Android smartphones and tablets. How to connect Android as a modem to a computer